AXCX Series
The Millivolt Output pressure sensors is based upon a proprietary packaging technology to reduce output offset or
common mode errors. This model provides a calibrated millivolt output with good output offset characteristics. In
addition the sensor utilizes a silicon, micromachined, stress concentration enhanced structure to provide a very
linear output to measured pressure.
These calibrated and temperature compensated sensors give an accurate and stable output over a wide
temperature range. This series is intended for use with non-corrosive, non-ionic working fluids such as air, dry
gases and the like. The C-GRADE is a lowest cost version of the millivolt output pressure sensors.
The output of the device is ratiometric to the supply voltage and operation from any D.C. supply voltage up to
+16 V is acceptable.
common mode errors. This model provides a calibrated millivolt output with good output offset characteristics. In
addition the sensor utilizes a silicon, micromachined, stress concentration enhanced structure to provide a very
linear output to measured pressure.
These calibrated and temperature compensated sensors give an accurate and stable output over a wide
temperature range. This series is intended for use with non-corrosive, non-ionic working fluids such as air, dry
gases and the like. The C-GRADE is a lowest cost version of the millivolt output pressure sensors.
The output of the device is ratiometric to the supply voltage and operation from any D.C. supply voltage up to
+16 V is acceptable.
Equivalent Circuit
Features
- 4 inH2O to 100 PSI Pressure Ranges
- 1 % Linearity Version
- Temperature Compensated
- Calibrated Zero and Span
Ratings
Supply Supply Voltage VS | 16 Vdc |
Common-mode pressure | 50 psig |
Lead Temperature (soldering 2-4 sec.) | 250° C |
Specifications
Temperature Ranges | - |
Compensated | 0 to 70°C |
Operating | -25 to 85°C |
Storage | -40 to 125°C |
Humidity Limits | 0 to 95% RH (non condensing) |
Available Package
Click On Package Image Below To View Package Drawing