Welcome to All Sensors “Put the Pressure on Us” blog. This blog brings out pressure sensor aspects in a variety of applications inspired by headlines, consumer and industry requirements, market research, government activities, and you.
Oxygen Tank Pressure
For many reasons, patients that require additional oxygen use storage tanks with compressed oxygen to supplement their normal air intake. The size and subsequent capacity of the tank may vary but the full pressure is typically about 2,000 psi and can go as high as 3,000 psi. With this pressure level in the tank, a regulator converts the supplied pressure to a lower, and much safer, level for the user. With newer aluminum and other materials instead of steel to avoid magnetism problems in situations such Magnetic resonance Imaging (MRI) tests, the pressure level is lower. Minimum pressure in tanks is around 300 psi with delivery systems operating at pressure below 400 psi. In contrast, the storage and delivery system of liquid oxygen in a hospital, pressures are usually around 50.0–55.1 psi. The amount of oxygen present inside the cylinder is measured by the pressure at the outlet nozzle.
where P is pressure in the cylinder,
V is the volume of the cylinder,
and T is the temperature
Image courtesy of Applied Home Healthcare Equipment.
Normal clean air contains 19% to 21% oxygen. In contrast, a supply of 60% oxygen with 40% nitrogen is considered acceptable for most clinical purposes but usually high much higher content is available.
Portable oxygen cylinders often have flow and pressure gauges. They provide easy, on sight measurements for a user. However, remote monitoring can use microelectromechanical systems (MEMS) pressure sensors to provide an electrical signal that can be transmitted to one or more receivers. With this information displayed remotely, a variety of healthcare givers can access and use the information.
Do you have a pressure sensing question? Let us know and we’ll address it in an upcoming blog.
Email us at [email protected]