Welcome to All Sensors “Put the Pressure on Us” blog. This blog brings out pressure sensor aspects in a variety of applications inspired by headlines, consumer and industry requirements, market research, government activities, and you.
Pressure for Clean Windows
Cleaning the glass windows at ground level for a multistory building is a little more complicated than the usual window cleaning task that most people hate. While much safer and less complex than rigs that clean high-rise buildings, as much as a 40-foot piping or pole system is required to reach windows in a four-story building from ground level but over 70-foot long poles are available. In most cases, the extended length consists of smaller sections pre-assembled at the building site for each operation but in some instances, a telescoping technique is used, at least for the last section.
With the water being pumped up several feet, a significant pressure drop can occur. For a 40-ft length pole, 17.3 psi is lost with 21.6 psi dropped at 50 feet and a 30.3 psi drop at 70 feet. As part of the water supply, water is pre-filtered. It then goes through a pressurized tank with a sand-like resin, so normal residential or commercial water pressure is increased.
While the poles in a water-fed pole cleaning system are made of lightweight carbon fiber, it still takes some strength and balance to do the job.
Do you have a pressure sensing question? Let us know and we’ll address it in an upcoming blog.
Email us at email@example.com