Welcome to All Sensors “Put the Pressure on Us” blog. This blog brings out pressure sensor aspects in a variety of applications inspired by headlines, consumer and industry requirements, market research, government activities, and you.
Fire Extinguisher Pressure
Caution: Contents under pressure. The typical residential or consumer fire extinguisher comes with this warning and a pressure gauge to ensure that it is in a safe zone and prepared for use should the occasion arise.
An extinguisher designed for use with a dry chemical only (ABC powder) like the one on the left in the figure is pressurized to 195 psi (1,344 kPa). Its gauge is in the green zone indicating that it is ready use. The clockwise red zone indicates an overcharged situation that could measure as much as 400 psi (2,758 kPa). A counterclockwise measurement below the safe zone, like the one on the right, means the extinguisher has lost charge and needs to be recharged to be effective. With only three pressure readings available (0, 195 and 400 psi), significant interpolation is required to determine the pressure if the reading is outside of the set range. Since the operating pressure is 195 psi and the pressure could go as high as 400 psi, tanks are pressure tested at an even higher level such as 585 psi (4,033 kPa) to ensure that they are safe. For this testing and other measurments in the manufacturing process, an accurate electronic measurement with high resolution, like the All Sensors CPM 602 Series, could provide the answer.
Do you have a pressure sensing question? Let us know and we’ll address it in an upcoming blog.
Email us at firstname.lastname@example.org